SEK SB-9000 Wet Look Sealer
Enhance the beauty of new and old interlocking pavers
SB-9000 is the perfect product to restore the look of old/tired pavers. The high solids formula combines properties of adhesion, flexibility, and UV light resistance to provide a long-lasting seal. SB-9000 will penetrate the substrate and provide a protective layer on the surface that is resistant to mild acid, alkali and salt attack.
SB-9000 will increase the stain resistance of the surface to allow for easier cleaning, maintenance, and extended wear. SB-9000 can be applied immediately after paver installation, as it is breathable and will not trap naturally occurring efflorescence and moisture. SB-9000 is a solvent-based product and is clear in appearance when applied. SB-9000 is designed as a one-coat application but a second coat may be applied if desired. Cured sealer is freeze resistant to -60°F (-51°C) and is stable up to a temperature of 180°F (82°C).
NOTE: Because of the high solids content of SB-9000, it is too thick to be sprayed. It must be applied with a roller.
NOTICE: Due to the moisture that we get here in the PNW, we do not recommend sealing at all from mid-September to mid-May. It is absolutely crucial that the pavers and the joint sand are completely dry before any sealing is done. Check out a dryness test here.
Coverage
APPLICATION SQ.FEET
Sealing with joint stabilization 200-300
Per gallon. Two coats of SB-9000 are recommended. Allow the first coat to dry to the touch before applying the second coat. Second coat coverage is estimated between 350-400 sq. ft. per gallon (32.5-37.2 M/G). Actual coverage may vary depending on the type, age, condition, joint size and porosity of the surface, application method and site conditions such as temperature.
For more information on applying sealer, read this article
Learn more about the dimensions, weight, and more that this product has to offer.
1 Gallon Bucket
1 Gallon Jug
Know exactly how to get this product from the warehouse to your house.
Do you deliver? If so, how does it work?
Absolutely. Unless you’re installing a fire pit kit or building a stone grill surround, you’ll likely need the assistance of a 48-foot flatbed semi-truck with a carry-on forklift. Before we deliver, we’ll always verify that we can access the drop site. We’ll need enough room to turn a large truck around along with 15 feet vertical clearance above any trees or carports.
How much does a pallet of stones weigh?
A pallet of stones weighs about 3,000 pounds, the same as a Ford Focus. That’s a ton and a half of concrete blocks! Each pallet contains about 100 square feet of stones. If you want to know approximately how many pallets you’ll need for your project, divide your total square footage by 100.
If I have extra stones, can I return them?
There’s nothing worse than being stuck with something you don’t need. That’s why we’ve always let our customers return extra stones in like-new condition for a full refund. It’s industry standard to charge a per-stone restocking fee for any returned items, but since it’s challenging to deliver the precise amount of stones for a project, we don’t charge any extra fees.
Do I have to return the pallets my pavers arrive on?
No, you don’t have to return the pallets. However, just like glass milk jars or pop cans, we charge a deposit for each pallet delivered so that we can get our pallets back in order to repair and reuse them again and again.
Any time after delivery, you can bring your pallets back for a full refund. If you have a few pallets of extra stones, you can return them just as they came for a full refund on the stones and the pallets. Customers will often rush individual pallets back during their project, but there’s no rush. You can return the pallets in bulk after the project is complete without accruing any interest or late fees.
If you’re a specifier or architect, you’ll find everything you need here.