Small Oval Planter | Paving Stone Manufacturers | Western Interlock
Stone Pavers and Retaining Wall Blocks Western Interlock Logo

Paving Stones and Retaining Wall Systems Made for the Northwest.

Small Oval Planter

Large Oval Paver PlanterView our small oval planter hardscape project featuring Tegula beveled pieces & Rotundo caps. Great for plazas, patios, and courtyards.


Western Interlock pavers are made from natural materials and due to variables in the photographic reproduction process, the actual color of the stones may vary slightly. For a truly accurate representation, we invite you to stop by any of our retail facilities to see them in person.


6' 8" long x 3' 4" wide

Architect Information
Are you an architect, and looking for more detailed product info? Check out our full documents list.

Other Information:

Project Time: 4-6 hours

Project materials included:
30 pieces Tegula Beveled Pieces
14 (+ 4 cut 7.5” ) pieces Tegula Pieces
14 Small, 4 Med & 12 Rec pieces Rotundo caps
1 tubes Glue

Tools needed include:
String line, level, gloves, shovel, wheel barrow, tape measure, caulking gun & Rubber mallet

Installation Instructions:

Step 1 – Prepare the site
Dig out an area 7’ long and 3’ 10” wide and 8” deep. Curve ends to create an oval shape. Fill the dug out area with 6” of gravel. Aggressively tamp the gravel using a hand tamp to create a solid base.

Step 2 – Lay base course
Use a rubber mallet to level stones as you set them in place. Lay 16 Tegula Beveled Pieces (eight per end) and 8 Tegula pieces (4 per side).

Step 3 – Continue
Finished project should be approximately 6’8” long and 3’ 4’ wide, curved ends will have an approximate radius of 20” to the outside of the stones.

Step 4 – Second course
Lay 14 Tegula Beveled Pieces (seven per end) and 6 Tegula pieces (3 per side) in middle. Set 4 – 7 1/2” cut Tegula pieces (2 per side) outside of full pieces to fill in the gap.

Step 5 – Continue
This sets a vertical stagger for the stones. Set and glue the courses together. Begin to cap the planter. The caps can be laid tight with no overhang, or spread out with a 1/2” overhang.

Step 6 – Cap the wall
Cap the planter with 14 small Rotundo caps (seven per end) 12 Rectangle Rotundo caps (6 per side) & 4 Medium Rotundo caps (1 on each side between Rectangles and Smalls). Secure with glue.

* Click on images to enlarge.